Size: W486*D436*H approx. 48mm(when inflated, not including terminals)
Top board size (on which an equipment is set): W447*D397*H15mm
Weight: approx. 4kg Withstand load: Max. 60kg An inflator
attached (White or Black)
Air floating, ultimate insulation is made affordable!
RAF-48 employs the same air floating structure used for valuable
electron microscope boards and realized with affordable price.
Air has overwhelming insulation ability compared to other vibration
isolation materials like rubber or springs.
Insulation ability of RAF-48 is almost perfect and you will experience
the improvement of S/N, transparency and texture of the sound due to the
decrease of distortion and the decrease of distortion and incidental
sound as well as deeper, wider and higher 3 dimensional acoustic field
to be played back.
-------------------------------------------------------------------------------- Withstand load: Max. 60 Kg! Filling up the air is easy.
Up to 60Kgs of heavy equipment can be set on RAF-48.
Filling up the air is easily done with the attached inflator at the air
filling terminal on the front panel RAF-48 enables easy refill of air
with a small inflator where conventional air floating boards needs
compressor and other big implement.
High grade materials for the top board and the cabinet!
Air floating or magnet floating cut off the vibration from outside, but
there remains the affection to the sound given by the materials directly
contacting the equipment.
The reason is the vibration generated by the audio equipment themselves;
vibrations of the motor of a CD player, an analog player, current of
amplifiers etc. that shakes the top board of the air floating
board/magnet floating board and be fed back to those equipment.
RAF-48 uses the best Finnish Birch with the best possible audio
characteristics for the top board and cabinet, and for the lively audio
quality with the energetic low range.
Floating boards with top board materials like glass, acrylic, plywood
laminate will pick up those vibrations and make a dull sound, with poor
low range.
Compact size for rack installation
RAF-48 is designed so it can be set not only for the equipment on the
top shelf of the rack but for all other shelves.
Thus, all audio equipment can be set on RAF-48s, and you will be able to
enjoy stereophony with audio information with outstanding S/N you have
never experienced.
An essential accessory
The RHB-20 produces vivid and life like music like no other under board
support
Hickory has a very tough restitution. It is used for the manufacture of
drumsticks etc and has been proven to be a very rare and acoustically
superior wood. It does not introduce changes in tone and has a flat
frequency balance. This leads to organic, natural and vivid sound.
Our under-board made from the Hickory is the RHB-20 which does not
create any side-effects in the sound quality. It does create a sound
reproduction with a deep bass and a clear, fresh presentation.
A 20mm thickness is optimum and suitable for insertion into commercial
audio racks. This eliminates the introduction of unwanted side effects
which can influence the sound.
It is also possible to use the RHB-20 in combination with other audio
boards to improve performance, resulting in a well balanced and open
sound, free from negative colorations. Hickory has a superb effect on
the musical tonality.