USB Cable with
Separate A-Connectors
[USB-1.0SP-TripleC]: "USB cable" series cables which have been highly reputed till now
have been further improved by changing the shielding from PE to a
fluorine system resin and the damper material from cotton to pure silk
(natural silk).
USB Cable (Standard type)
[USB-1.0PL-TripleC]:
"USB cable" series cables which have been highly reputed till now have
been further improved by changing the shielding from PE to a fluorine
system resin and the damper material from cotton to pure silk (natural
silk).
Conventional USB 3.0 cables have bidirectional signal lines and power
lines in one cable, as well as signal lines for USB 2.0 and as many as 8
conductors in total, causing noise interference in each Transmission
deterioration could not be avoided.
The USB-TRES is a total of six conductors by removing the signal line of
USB 2.0, and furthermore the world's first USB 3 which completely cuts
mutual interference by dividing the bidirectional signal line and the
power line of USB 3.0 into three It will be a .0 dedicated cable.
In addition to its high-speed transmission, USB 3.0 transmission
completely released from each noise interference enables ultra-high S /
N ratio, ultra-low distortion, super high resolution transmission that
has never been experienced Become.
Operation check (2017 10/27)
Mac Pro with Mac USB 3.0 port, Macbook Pro, Macbook, Macbook Air
Windows USB 3.0 port model general model
Precautions on use
Connection of this cable to the USB 2.0 terminal is not supported.
If you are using a computer with USB 2.0, please purchase the following
products.
IEEE 1394 cable has a poor structure than the USB
cable
Conventional IEEE 1394 cables had a structure in which a bidirectional
signal line and a power line, a total of six conductors co-existed in
one cable.
In this structure, the interference between each line occurs more than
the structure of the USB cable where the four conductors of the signal
line and the power supply line coexist, and the transmission
characteristics and the sound quality are remarkably deteriorated.
IEEE 1394 transmission which is said to have superiority over USB
transmission, due to its high transmission speed due to the music
production site and PC audio, but when actually listening and compares
with USB and IEEE 1394 in the same environment USB There is no doubt
that this poor structure of the IEEE 1394 cable is very influential in
many people who feel the sound quality superiority.
USB
Isolator [RUI-1] : -A special version with separate A-connectors is available upon
order.
※RUI-1 is currently not applicable for USB-2.0 equipments.
LAN
Isolator [RLI-1]: Cut noise transmission on network audio systems. Specifications:
Body Dimensions 24W*41D*21H
(mm) (Excluding a cable)
Cable length
79 (mm)
Weight
40g (Including the cable and connector)
LAN Terminator [RLT-1]: Achieve dramatic improvements in sound quality by noise control
and the suppression of vibrations caused by network equipment. Specifications:
Dimensions
W12mm x H12mm (14.5mm incl. LAN lever H) x D71mm(incl. LAN connector)
USB
Terminator [RUT-1]: Achieve dramatic improvements in sound quality by noise control
and the suppression of vibrations caused by USB equipment. Specifications:
Dimensions
W17.9mm x H10.5mm x D44.6mm